Posts for: November, 2016

AnAssortmentofOrthodonticToolshelpsusSolveComplexBiteProblems

There are an assortment of techniques and treatments in an orthodontist's toolkit, braces being the most common and best known. Of course, there wouldn't be any tools at all if teeth couldn't move naturally.

Teeth aren't directly connected to the jawbone. An elastic tissue called the periodontal ligament lies between each one, with tiny fibers attaching to the tooth on one side and to the bone on the other. The ligament's elasticity and other qualities allow micro-movements of the teeth as we bite.

The ligament can also adapt to changes in the mouth and teeth by allowing the teeth to move to different positions. That's the basic concept behind braces: we thread a thin wire through brackets attached to the teeth, which we then attach to anchor points (usually back teeth not intended to move) and apply tension to it. Gradually over time, the target teeth move.

But what if your malocclusion (poor bite) is more complicated or the back teeth can't supply enough anchorage for moving the intended teeth? That's where we take advantage of other sources of anchorage.

One such source is the patient's skull, which we can make use of through special headgear worn a few hours a day. The device consists of a strap under tension that runs around the back of the head or neck to a wire housing attached to brackets on the target teeth. If you want to “pull” the teeth forward, the strap would come over the chin, forehead or a combination of both.

We may sometimes want to isolate some teeth to move without moving nearby teeth, such as moving front teeth backward to close a space without affecting teeth further to the rear. We can create a separate anchor point in the jaw with a TAD or temporary anchorage device.

TADs are tiny screws made of stainless steel inserted temporarily into the bone. We loop an elastic band over the TAD on one end and to a bracket or tension wire attached to the target teeth on the other. When we've achieved the teeth's new position we can easily remove the TAD from the bone.

These various tools make it possible to correct difficult or complex malocclusions. They may not always look attractive, but they'll help ensure the final result is.

If you would like more information on available orthodontic treatments, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “Orthodontic Headgear & Other Anchorage Appliances.”


DentalCrownsfortheKingofMagic

You might think David Copperfield leads a charmed life:  He can escape from ropes, chains, and prison cells, make a Learjet or a railroad car disappear, and even appear to fly above the stage. But the illustrious illusionist will be the first to admit that making all that magic takes a lot of hard work. And he recently told Dear Doctor magazine that his brilliant smile has benefitted from plenty of behind-the-scenes dental work as well.

“When I was a kid, I had every kind of [treatment]. I had braces, I had headgear, I had rubber bands, and a retainer afterward,” Copperfield said. And then, just when his orthodontic treatment was finally complete, disaster struck. “I was at a mall, running down this concrete alleyway, and there was a little ledge… and I went BOOM!”

Copperfield’s two front teeth were badly injured by the impact. “My front teeth became nice little points,” he said. Yet, although they had lost a great deal of their structure, his dentist was able to restore those damaged teeth in a very natural-looking way. What kind of “magic” did the dentist use?

In Copperfield’s case, the teeth were repaired using crown restorations. Crowns (also called caps) are suitable when a tooth has lost part of its visible structure, but still has healthy roots beneath the gum line. To perform a crown restoration, the first step is to make a precise model of your teeth, often called an impression. This allows a replacement for the visible part of the tooth to be fabricated, and ensures it will fit precisely into your smile. In its exact shape and shade, a well-made crown matches your natural teeth so well that it’s virtually impossible to tell them apart. Subsequently, the crown restoration is permanently attached to the damaged tooth.

There’s a blend of technology and art in making high quality crowns — just as there is in some stage-crafted illusions. But the difference is that the replacement tooth is not just an illusion: It looks, functions and “feels” like your natural teeth… and with proper care it can last for many years to come.  Besides crowns, there are several other types of tooth restorations that are suitable in different situations. We can recommend the right kind of “magic” for you.

If you would like more information about crowns, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine articles “Crowns & Bridgework” and “Porcelain Crowns & Veneers.”


CorrectaCross-BitebyWideningtheUpperJawwithanExpander

A poor bite (malocclusion) could be more than simply teeth out of alignment. There could be complex causes for the malocclusion, possibly involving the facial bone structure.

An example of this is the development of a cross-bite due to problems with the upper jaw and palate (the roof of the mouth), jointly called the maxilla. The maxilla is in fact formed by two bones fused together in the center of the palate in what's called the midline suture. The suture doesn't completely fuse until after puberty.

Sometimes a maxilla's development doesn't follow a normal track. The upper jaw doesn't widen as it should, which leads to the cross-bite where the upper back teeth abnormally bite inside the lower teeth. The upper front teeth continue to bite normally in front of the lower front teeth. This also can have profound influence on breathing, causing sleep apnea.

We can correct this by using an orthodontic appliance called a palatal expander before the midline suture fuses. The expander gradually widens the upper jaw to its normal width and thus eliminates the cross-bite.

Positioned at the roof of the mouth, the expander has metal arms that extend from a central hinge to exert pressure on the inside of the upper teeth. The patient or a caregiver uses a small key to turn a mechanism that extends the arms toward the teeth a tiny amount each day. This gradually widens the jaw, while at the same time stimulating bone growth at the midline suture. Eventually the gap fills with bone to solidify the new width as the suture fuses.

It's important to undertake this treatment before fusion. If you wait until after puberty, you will need to separate the bones first to attempt it. The overall impact and cost is much less if you act promptly in the early years.

Palatal expansion may not be the right treatment in every case, so we'll need to perform a thorough orthodontic exam first. If, however, we do determine it can help, using an expander can improve function, correct future breathing problems and make possible a more attractive future smile.

If you would like more information on orthodontic treatment options, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “Palatal Expanders: Orthodontics is more than just Moving Teeth.”




Contact Us

Southard Family Dentistry

(870) 932-7000
2600 Browns Lane Jonesboro, AR 72401